Tomu moc neverim.
IDSka ma u P1608 zapsano:
Ztráta hlídacího signálu (FIP) - tedy podle mne je tam signal mezi PCM a FIP a ten se nekdy do PCM nedostane, tedy nejaky drat/konektor ko ?
Tady to resil a nasel uhnily drat:
http://fordtransit.org/forum/viewtopic.php?f=5&t=39393
Once removed, i pulled the wire down and was greeted by an awful sight, the silver insulating cover had rubbed straight through and i could see one of the wires underneath which was corroded. When i stripped the stuff back, this wire is almost completely non-existant, all you can see is a hole inside the wires insulation. This is a white/green wire, there is a red/blue wire which has just started to rub, but the copper is fresh so i will tape this one up, the other wire needs cutting back and soldering, need to think of the best solution for this.