ForDiag.cz

Hi,

I am a new user from germany. Is there a manual available with a short description of every menu item and warnings about potentially hazardous write commands?

_________________
Uwe
Mondeo MK3 2.0 TDCI Ghia X Kombi 2004

Hi,

currently no, unfortunately. In cca 3 days will be in Czech language basic description of screens, etc.
I will try to translate it to english with google, lets see ...

About potential hazardous commands: there is only one thing: writing C2I codes on TDCI.
If you will write bad numbers, for example in the bad order, you will get raw engine. But it could be simple fixed by rewriting.

All commands what are sended to ECU are "safety" (for current version of ForDiag).
Every command is checked by ECU. ECU check conditions (RPM, temperature, ...) and only if this action could be started, it is processed.
For example: "test of outputs" can be processed only if engine is in crank mode (0 RPM). If you will try to switch such test at running engine, ECU will forbid this action.

_________________
Tomas, fordiag (at) fordiag.cz
Mondeo 2.5T I5 Ghia Duratec volvotop
Mondeo 1.8 16V Ghia Zetec blacktop