Hi Tomin, it was a long time that i read of your ForDiag in some forum and
i would try to have some infos from you if you want.
I'm from Italy and it's a long time that i tried to connect the EEC-IV
placed in my Escort Cosworth (last model T25) that i understand had the
same pins you described and used for extracting the data bus (pin 18 & 19).
First of all i want ask if it's still possible to buy the cable & sw (i saw
that you sell it at 70-80€ circa) from you and evenctually the freight
expenses to send all to Italy. I had also programmers capability (C
language and others..) and my big dream is to have a porting of your system
in a different device like smartphones (possibly android) so me and other
friends can have a real time monitoring with a small in-car device.
This is really a big thing cause we can have all the right parametrs under
control and also set some alarms on high/strange values from instruments
monitored. I think also that if you have the knowledge of the DCL protocol
(via RS485/J1708) that i know it's a really difficult thing to implement,
so why don't you (or we together if you want) try to have an embedded "translation" for
an ELM327 so we can convert it for OBD2 (and consequently BT or WIFI
and so have the
opportunity to use ready software for various devices?
I hope that i don't have bored and that my idea is interesting for you.
Let me know what you think and the cost for a kit.
Many thanks for your patience.
Best regards,
Luca